No Colour Selected
Hammerite Direct To Rust Metal Paint Hammered Finish

Hammerite Direct To Rust Metal Paint Hammered Finish

Hammerite-Ultimate metal protection.
Select a Colour
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Hammered finish
  • Coverage 5m2per litre
  • Drying Time Touch dry 1-2 hours, recoatable after 4 hours
  • Coats 2
Product Features
  • Direct to rust
  • No need for primer or undercoat
Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one
Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously.Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.
Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking."
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
  • 1. Preparing the Surfaces
    Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface.If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered.On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered
  • 2. After use
    Cleaning After Final Use- Cleaning your brushes and rollers immediately after their final use ensures they can be reused for multiple projects, saving you money and reducing waste. ​ Cleaning-​ 1. Remove Excess Paint- Scrape off excess paint into container for future projects.​ 2. Use Paint Thinner-- Use a paint thinner to clean brushes and rollers.​ 3. Reuse Paint Thinner- Allow the paint solids to settle and reuse the thinner by pouring the clear liquid into another container.​ Responsible Disposal- Dispose of the remaining solids and used thinner at a hazardous waste facility. Do not pour any solvent-based paint, paint thinner or wash water down the drain or onto the ground.​ Do not flush paint down the drain, including when cleaning painting tools
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from frost. Whenever possible, reuse, recycle, or donate leftover paint. Find local services at mywaste.ie or consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or waste washings down drains or sinks. Follow instructions at mywaste.ie to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Washings- Collect used brush cleaner in a container; don't pour it into drains or on the ground. Let solids settle, pour off clear liquid into another container for reuse or disposal. Dispose of remaining solids and used cleaner at a hazardous waste facility. Do not flush paint down drains, including when cleaning tools.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Sorry, we couldn't find any results
Fetching the data, please wait...