Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Thanks!
We will send you colourful news every now and then.
Delete Account
Hammerite Direct To Rust Metal Paint Smooth Finish
-
Finish Smooth finish
-
Coverage 5m2per litre
-
Drying Time Touch dry 1-2 hours, recoatable after 4 hours
-
Coats 2
Product Description
Application Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesAbrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.Paint a test patch of Hammerite Direct to Rust Metal Paint Smooth onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint
-
2. CleaningAfter use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners. Do not use or store in extremes of temperature
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.